I explain how I use a wireless access point as a repeater so I can mount the antenna high in the house and repeat the signal throughout the house.
An access point has to be used because the 2.4GHz signal used for WiFi is heavily attenuated in cable runs at anything over just a few feet. So running a long cable from the high mounted antenna to computer would never work.
4/5/10
2.4 Ghz 19 db Antenna
Make a long range wi-fi repeater. Point directional antenna at target access point (SSID).
Antenna gain is 8 db and with short run to rf amp signal is boosted again. Dlink DAP 1160
allows selection of internet source with site survey. Repeated access point also is much
stronger signal.
Antenna gain is 8 db and with short run to rf amp signal is boosted again. Dlink DAP 1160
allows selection of internet source with site survey. Repeated access point also is much
stronger signal.
WiFi Antenna Mod!
Turn a standard WiFi antenna into a super range extender antenna just like the ones sold in stores for $30 or more. Your cost? About 5 CENTS
D.I.Y cheap Wlan antenna
— how to make your own 16dbi WLAN antenna that is 6X more powerful than the standard.
1 watt Wi-Fi amplifier 802.11b/g extends range to 5 bars in entire complex
1 watt bidirectional amplifier for TX/RX (transmit/receive) effectively increases throughput and connection reliability. the chip that switches from RX to TX proves to be high quality and does not affect throughput!
Helix directional WiFi antenna by web7days Tested
I also completed and tested 10 dbi 19 elments omni wifi antenna on 1st June 2008.
29th May 2008 19:00(original fabrication date) Tested corrections are made and completed. The aluminium reflector is 15 cm in diameter, the PVC tube(corrected here from aluminium to PVC) is 2.5 cm in diameter and 60 cm in length. Wrap a single 2.5 mm solid copper wire at every 3.5 cm apart.
IT's WORKING prefect with my dish antenna that connected a router! ( http://uk.youtube.com/watch?v=Xze_efr... ) tested on 5 June 2008 12:35 with two different Wifi softwares.
29th May 2008 19:00(original fabrication date) Tested corrections are made and completed. The aluminium reflector is 15 cm in diameter, the PVC tube(corrected here from aluminium to PVC) is 2.5 cm in diameter and 60 cm in length. Wrap a single 2.5 mm solid copper wire at every 3.5 cm apart.
IT's WORKING prefect with my dish antenna that connected a router! ( http://uk.youtube.com/watch?v=Xze_efr... ) tested on 5 June 2008 12:35 with two different Wifi softwares.
My free WiFi wireless Internet setup
I explain how I use a wireless access point as a repeater so I can mount the antenna high in the house and repeat the signal throughout the house.
An access point has to be used because the 2.4GHz signal used for WiFi is heavily attenuated in cable runs at anything over just a few feet. So running a long cable from the high mounted antenna to computer would never work.
An access point has to be used because the 2.4GHz signal used for WiFi is heavily attenuated in cable runs at anything over just a few feet. So running a long cable from the high mounted antenna to computer would never work.
Subscribe to:
Posts (Atom)